Changes between Version 8 and Version 9 of TracInstall
- Timestamp:
- 10/05/2023 07:15:48 AM (14 months ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
TracInstall
v8 v9 1 = Trac Installation Guide for 1. 31 = Trac Installation Guide for 1.5 2 2 [[TracGuideToc]] 3 3 4 Trac is written in the Python programming language and needs a database, [https://sqlite.org/ SQLite], [https://www.postgresql.org/ PostgreSQL], or [https://mysql.com/ MySQL]. For HTML rendering, Trac uses the [http://jinja.pocoo.org Jinja2] templating system, though Genshi templates will still be supported until at leastTrac 1.5.1.4 Trac is written in the Python programming language and needs a database, [https://sqlite.org/ SQLite], [https://www.postgresql.org/ PostgreSQL], or [https://mysql.com/ MySQL]. For HTML rendering, Trac uses the [http://jinja.pocoo.org Jinja2] templating system, though Genshi templates are supported until Trac 1.5.1. 5 5 6 6 Trac can also be localized, and there is probably a translation available in your language. If you want to use the Trac interface in other languages, then make sure you have installed the optional package [#OtherPythonPackages Babel]. Pay attention to the extra steps for localization support in the [#InstallingTrac Installing Trac] section below. Lacking Babel, you will only get the default English version. … … 8 8 If you're interested in contributing new translations for other languages or enhancing the existing translations, please have a look at [trac:wiki:TracL10N TracL10N]. 9 9 10 What followsare generic instructions for installing and setting up Trac. While you may find instructions for installing Trac on specific systems at [trac:TracInstallPlatforms TracInstallPlatforms], please '''first read through these general instructions''' to get a good understanding of the tasks involved.10 These are generic instructions for installing and setting up Trac. While you may find instructions for installing Trac on specific systems at [trac:TracInstallPlatforms TracInstallPlatforms], please '''first read through these general instructions''' to get a good understanding of the tasks involved. 11 11 12 12 [[PageOutline(2-3,Installation Steps,inline)]] … … 14 14 == Dependencies 15 15 === Mandatory Dependencies 16 16 17 To install Trac, the following software packages must be installed: 17 18 18 * [https://www.python.org/ Python], version >= 2.7 and < 3.0 19 (note that we dropped the support for Python 2.6 in this release) 20 * [https://pypi.org/project/setuptools setuptools], version >= 0.6 19 * [https://www.python.org/ Python], version >= 3.5 20 * [https://pypi.org/project/setuptools setuptools], version > 5.6 21 21 * [https://pypi.org/project/Jinja2 Jinja2], version >= 2.9.3 22 22 23 {{{#!div style="border: 1pt dotted; margin: 1em" 24 **Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable `PKG_RESOURCES_CACHE_ZIP_MANIFESTS` must be set in order to avoid significant performance degradation. More information may be found in [#DeployingTrac Deploying Trac]. 25 }}} 26 27 You also need a database system and the corresponding python bindings. The database can be either SQLite, PostgreSQL or MySQL. 23 You also need a database system and the corresponding Python bindings. The database can be either SQLite, PostgreSQL or MySQL. 28 24 29 25 ==== For the SQLite database #ForSQLite … … 37 33 You need to install the database and its Python bindings: 38 34 * [https://www.postgresql.org/ PostgreSQL], version 9.1 or later 39 * [https://pypi.org/project/psycopg2 psycopg2], version 2. 0or later35 * [https://pypi.org/project/psycopg2 psycopg2], version 2.5 or later 40 36 41 37 See [trac:DatabaseBackend#Postgresql DatabaseBackend] for details. … … 54 50 ==== Subversion 55 51 56 [https://subversion.apache.org/ Subversion], 1. 6.x or later and the '''''corresponding''''' Python bindings.52 [https://subversion.apache.org/ Subversion], 1.14.x or later and the '''corresponding''' Python bindings. 57 53 58 54 There are [https://subversion.apache.org/packages.html pre-compiled SWIG bindings] available for various platforms. See [trac:TracSubversion#GettingSubversion getting Subversion] for more information. … … 60 56 {{{#!div style="border: 1pt dotted; margin: 1em" 61 57 **Note:** 62 * Trac '''doesn't''' use [http ://pysvn.tigris.org/PySVN], nor does it work yet with the newer `ctype`-style bindings.58 * Trac '''doesn't''' use [https://pypi.org/project/PySVN PySVN], nor does it work yet with the newer `ctype`-style bindings. 63 59 * If using Subversion, Trac must be installed on the '''same machine'''. Remote repositories are [trac:ticket:493 not supported]. 64 60 }}} … … 75 71 76 72 ==== Web Server 73 77 74 A web server is optional because Trac is shipped with a server included, see the [#RunningtheStandaloneServer Running the Standalone Server] section below. 78 75 79 76 Alternatively you can configure Trac to run in any of the following environments: 80 * [https://httpd.apache.org/ Apache] with 81 - [https://github.com/GrahamDumpleton/mod_wsgi mod_wsgi], see [wiki:TracModWSGI] and 77 * [https://httpd.apache.org/ Apache] with 78 - [https://github.com/GrahamDumpleton/mod_wsgi mod_wsgi], see [wiki:TracModWSGI] and 82 79 [https://code.google.com/p/modwsgi/wiki/IntegrationWithTrac ModWSGI IntegrationWithTrac]. 83 80 - [http://modpython.org/ mod_python 3.5.0], see TracModPython 84 81 * a [https://fastcgi-archives.github.io FastCGI]-capable web server (see TracFastCgi) 85 * an [https://tomcat.apache.org/connectors-doc/ajp/ajpv13a.html AJP]-capable web 86 server (see [trac:TracOnWindowsIisAjp TracOnWindowsIisAjp]) 82 * an [https://tomcat.apache.org/connectors-doc/ajp/ajpv13a.html AJP]-capable web server (see [trac:TracOnWindowsIisAjp TracOnWindowsIisAjp]) 87 83 * Microsoft IIS with FastCGI and a FastCGI-to-WSGI gateway (see [trac:CookBook/Installation/TracOnWindowsIisWfastcgi IIS with FastCGI]) 88 * a CGI-capable web server (see TracCgi), '''but usage of Trac as a cgi script 89 is highly discouraged''', better use one of the previous options. 90 84 * a CGI-capable web server (see TracCgi), '''but usage of Trac as a cgi script is highly discouraged''', better use one of the previous options. 91 85 92 86 ==== Other Python Packages 93 87 94 * [http://babel.pocoo.org Babel], version 0.9.6 or >= 1.3, 95 needed for localization support 96 * [http://docutils.sourceforge.net docutils], version >= 0.3.9 97 for WikiRestructuredText. 98 * [http://pygments.org Pygments] for 99 [TracSyntaxColoring syntax highlighting]. 100 * [https://pypi.org/project/textile Textile] for rendering the [https://github.com/textile/python-textile Textile markup language]. 101 * [http://pytz.sourceforge.net pytz] to get a complete list of time zones, 102 otherwise Trac will fall back on a shorter list from 103 an internal time zone implementation. 88 * [http://babel.pocoo.org Babel], version >= 2.2, needed for localization support 89 * [http://pytz.sourceforge.net pytz] to get a complete list of time zones, otherwise Trac will fall back on a shorter list from an internal time zone implementation. Installing Babel will install pytz. 90 * [http://docutils.sourceforge.net docutils], version >= 0.14, for WikiRestructuredText. 91 * [http://pygments.org Pygments], version >= 1.0, for [TracSyntaxColoring syntax highlighting]. 92 * [https://pypi.org/project/textile Textile], version >= 2.3, for rendering the [https://github.com/textile/python-textile Textile markup language]. 104 93 * [https://pypi.org/project/passlib passlib] on Windows to decode [TracStandalone#BasicAuthorization:Usingahtpasswdpasswordfile htpasswd formats] other than `SHA-1`. 105 94 * [https://pypi.org/project/pyreadline pyreadline] on Windows for trac-admin [TracAdmin#InteractiveMode command completion]. … … 118 107 119 108 === Using `pip` 120 `pip` is the modern Python package manager and is included in Python 2.7.9 and later. Use [https://bootstrap.pypa.io/get-pip.py get-pip.py] to install `pip` for an earlier version of Python. 121 122 {{{#!sh 123 $ pip install Trac 124 }}} 125 126 `pip` will automatically resolve the //required// dependencies (Jinja2 and setuptools) and download the latest packages from pypi.org. 109 110 `pip` is the modern Python package manager and is included in Python distributions. `pip` will automatically resolve the //required// dependencies (Jinja2 and setuptools) and download the latest packages from pypi.org. 127 111 128 112 You can also install directly from a source package. You can obtain the source in a tar or zip from the [trac:TracDownload] page. After extracting the archive, change to the directory containing `setup.py` and run: … … 134 118 `pip` supports numerous other install mechanisms. It can be passed the URL of an archive or other download location. Here are some examples: 135 119 136 * Install the latest stable version from a zip archive:137 {{{#!sh138 $ pip install https://download.edgewall.org/trac/Trac-latest.zip139 }}}140 120 * Install the latest development version from a tar archive: 141 121 {{{#!sh 142 122 $ pip install https://download.edgewall.org/trac/Trac-latest-dev.tar.gz 143 123 }}} 144 * Install the unreleased 1. 2-stable from subversion:145 {{{#!sh 146 $ pip install svn+https://svn.edgewall.org/repos/trac/branches/1. 2-stable124 * Install the unreleased 1.4-stable from subversion: 125 {{{#!sh 126 $ pip install svn+https://svn.edgewall.org/repos/trac/branches/1.4-stable 147 127 }}} 148 128 * Install the latest development preview (//not recommended for production installs//): … … 153 133 The optional dependencies can be installed from PyPI using `pip`: 154 134 {{{#!sh 155 $ pip install babel docutils pygments pytz textile 156 }}} 135 $ pip install babel docutils pygments textile 136 }}} 137 138 The optional dependencies can alternatively be 139 specified using the `extras` keys in the setup file: 140 {{{#!sh 141 $ pip install Trac[babel,rest,pygments,textile] 142 }}} 143 144 `rest` is the extra that installs the `docutils` 145 dependency. 146 147 Include `mysql` or `psycopg2-binary` in the 148 list if using the MySQL or PostgreSQL database. 157 149 158 150 Additionally, you can install several Trac plugins from PyPI (listed [https://pypi.org/search/?c=Framework+%3A%3A+Trac here]) using pip. See TracPlugins for more information. … … 175 167 }}} 176 168 177 [TracAdmin trac-admin] will prompt you for the information it needs to create the environment: the name of the project and the [TracEnvironment#DatabaseConnectionStrings database connection string]. If you're not sure what to specify for any of these options, just press `<Enter>` to use the default value. 169 [TracAdmin trac-admin] will prompt you for the information it needs to create the environment: the name of the project and the [TracEnvironment#DatabaseConnectionStrings database connection string]. If you're not sure what to specify for any of these options, just press `<Enter>` to use the default value. 178 170 179 171 Using the default database connection string will always work as long as you have SQLite installed. For the other [trac:DatabaseBackend database backends] you should plan ahead and already have a database ready to use at this point. … … 194 186 == Deploying Trac 195 187 196 {{{#!div style="border: 1pt dotted; margin: 1em"197 **Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable `PKG_RESOURCES_CACHE_ZIP_MANIFESTS` must be set in order to avoid significant performance degradation.198 199 If running `tracd`, the environment variable can be set system-wide or for just the user that runs the `tracd` process. There are several ways to accomplish this in addition to what is discussed here, and depending on the distribution of your OS.200 201 To be effective system-wide a shell script with the `export` statement may be added to `/etc/profile.d`. To be effective for a user session the `export` statement may be added to `~/.profile`.202 {{{#!sh203 export PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1204 }}}205 206 Alternatively, the variable can be set in the shell before executing `tracd`:207 {{{#!sh208 $ PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1 tracd --port 8000 /path/to/myproject209 }}}210 211 If running the Apache web server, !Ubuntu/Debian users should add the `export` statement to `/etc/apache2/envvars`. !RedHat/CentOS/Fedora should can add the `export` statement to `/etc/sysconfig/httpd`.212 }}}213 214 188 === Running the Standalone Server 215 189 … … 226 200 === Running Trac on a Web Server 227 201 228 Trac provides various options for connecting to a "real" web server: 202 Trac provides various options for connecting to a "real" web server: 229 203 - [TracFastCgi FastCGI] 230 - [wiki:TracModWSGI Apache with mod_wsgi] 204 - [wiki:TracModWSGI Apache with mod_wsgi] 231 205 - [TracModPython Apache with mod_python] 232 206 - [TracCgi CGI] //(should not be used, as the performance is far from optimal)// … … 279 253 Assuming the deployment has been done this way: 280 254 {{{#!sh 281 $ trac-admin /var/trac/<project> deploy /var/www 255 $ trac-admin /var/trac/<project> deploy /var/www/trac 282 256 }}} 283 257 284 258 Add the following snippet to Apache configuration, changing paths to match your deployment. The snippet must be placed ''before'' the `ScriptAlias` or `WSGIScriptAlias` directive, because those directives map all requests to the Trac application: 285 259 {{{#!apache 286 Alias /trac/chrome / path/to/trac/htdocs287 288 <Directory "/ path/to/www/trac/htdocs">260 Alias /trac/chrome /var/www/trac/htdocs 261 262 <Directory "/var/www/trac/htdocs"> 289 263 # For Apache 2.2 290 264 <IfModule !mod_authz_core.c> … … 342 316 == Configuring Authentication 343 317 344 Trac uses HTTP authentication. You'll need to configure your web server to request authentication when the `.../login` URL is hit (the virtual path of the "login" button). Trac will automatically pick the `REMOTE_USER` variable up after you provide your credentials. Therefore, all user management goes through your web server configuration. Please consult the documentation of your web server for more info.345 346 The process of adding, removing, and configuring user accounts for authentication depends on the specific way you run Trac. 318 Trac uses HTTP authentication. You'll need to configure your web server to request authentication when the `.../login` URL is hit (the virtual path of the "login" button). Trac will automatically pick the `REMOTE_USER` variable up after you provide your credentials. Therefore, all user management goes through your web server configuration. Please consult the documentation of your web server for more info. 319 320 The process of adding, removing, and configuring user accounts for authentication depends on the specific way you run Trac. 347 321 348 322 Please refer to one of the following sections: